Website

It’s Easy to Customize a WamBam Fence

Did you know that you can easily customize our vinyl fence? Sometimes a “one size fits all” approach just doesn’t work for your fence. When you buy pre-assembled panels off the shelf of the box stores, the install is very unforgiving because if you need to make any adjustments, you have to cut the entire panel, which can be very difficult when dealing with large panels. Our easy-to-assemble panels allow for much easier sizing adjustments.

And sometimes you want to change the style and design of your fence. There are many things you can do to customize our vinyl fence. This is also helped by our 4-way grooved posts which enable the placement of horizontal rails virtually anywhere along the vertical fence post.

Most Popular Vinyl Fence Customization

1. Shorten a Vinyl Privacy Fence

Our 6ft high privacy fence is a perfect height for most people, but sometimes people have special requirements where they need a shorter vinyl privacy fence. The customer below wanted some privacy at the front of his house but city code dictated that he could be no higher than 4ft tall. The customer below took our Curious George Vinyl Privacy Fence and took 2ft off to make a 4ft high vinyl fence.

Gil customizes his privacy fence to a 4ft height to meet requirements

 2. Creating a Swooped Vinyl Picket Fence

Some customers prefer a more decorative vinyl picket fence, and it’s easy to cut the pickets in either a swoop or a concave design. The customer below cut his vinyl picket fence into a swoop to make it look more decorative in front of his house.

Dubi cut his pickets into a swoop style and also hugged his bottom rail to the ground for a bit of a different look.

Dubi cut his pickets into a swoop style and also hugged his bottom rail to the ground for a bit of a different look.

3. Adjusting the Amount of Rails in a Ranch Rail

A ranch rail fence offers a lot of versatility and is a very affordable fencing solution, but sometimes it just doesn’t offer enough restriction to contain a pet. It’s really easy to add another rail or two to get the same effect of the fence, while having a little added security so Fido can’t squeeze underneath. Below shows a picture where a customer customized the 3-rail Even Steven vinyl fence to include 4 and 5 rails where he felt necessary.

John added a couple more rails to make his ranch rail fence safer for his smaller dog.

John added a couple more rails to make his ranch rail fence safer for his smaller dog.

Vinyl is a very easy material to work with so you can cut it with minimal ease using a standard fine tooth circular saw blade. You can read more about customizing in our knowledge base or visit our website.

Leave a Comment

Your email address will not be published. Required fields are marked *

Categories