How do I mount my vinyl fence rail to a pre-existing wall or fence?
To affix a panel to a wall, you will need to purchase vinyl fence brackets. Please see the spec drawings of your fence style to determine the size of brackets that you need. A. Place wall mounts evenly with fence rail spacing and secure with screws. B. Install fence panel rails into wall mounts and
by DeniseInstalling a Gate Without a Gate Jig
If your sidewalk gets in the way of using the provided gate jig, you can either cut down the provided vinyl gate jig or re-create a small gate jig out of 4×4 wood (see gate instructions) to span the distance between the anchor and the concrete as necessary. The jig can simply be be pressure
by DeniseWorking around a tree in your fence run
Sometimes it’s unavoidable to have an obstacle such as a tree in your fence line. Here is a tip showing what one customer did. However, we must caution that trees do grow. Please be really careful when attempting something like this, and leave room for the tree to grow. You would not want a growing
by DeniseCan I make my post more solid when it’s against a wall?
Although not totally necessary, if you would like to create a solid connection between your post, wall, and fasteners, you can fill your post with expanding foam.
by DeniseImportant Information About Fence Conforming to Pool Code
We have designed certain styles of our fence to be ICC code compliant, which is an industry standard that meets the safety requirements for most municipalities and HOAs. For swimming and other child safety gates, most safety standards specify: a) Your fence height needs to be between 4’ and 6’ high minimum b) Your gate
by DeniseTips on using 3-1/2in. screws
Use a ‘Bit & Screw Holder’ when using 3-1/2 inch screws. This handy little device comes in most drill sets, and really helps to set up and screw the 3-1/2 inch screws into place. It totally prevents you from dropping the screw and having to hold on to it at point of entry. If you
by DeniseWhat saw blade should I use when cutting vinyl?
Vinyl fencing can be cut just like wood. Preferably use a circular saw with a PVC blade or a sharp and straight fine-tooth carbide blade. If your saw blade is designed for rough cutting lumber and dull, it could shatter the vinyl. This is especially true if the vinyl is cold.
by DeniseTips on using a manual post pounder
1. You can either leave the leveling donut off or on during pounding. In the vast majority of installations, the top of your anchor will not mushroom enough to cause conflict when putting the donut back over the anchor. The only potential problem is really hard or dry ground where repeated blows with the pounder are
by DeniseWarnings on using a manual post pounder
1. You’re gonna sweat! Getting something that’s about 20 or even 30lbs to move up and down repeatedly takes a lot of work. You can see this by watching the “Manual Post Drivers in Action Video” on our website. Even on a cool day you are going to sweat. Remember you will be sweating about
by Denise